低压力下环保型络合剂和氧化剂对铝合金化学机械抛光的影响

在低平坦化压力下用壳寡糖(COS)环保型络合剂及H₂O₂氧化剂化学机械抛光铝合金，用原子力显微镜观测抛光后的表面质量，并用X射线光电子能谱仪分析其表面的钝化膜元素，用纳米压痕仪分析钝化膜的力学性能，研究COS及H₂O₂对铝合金CMP的作用机理。结果表明:H₂O₂质量分数为2%时，材料去除率随COS含量的增加而增大，当COS质量分数为0.32%时，材料的去除速率达861 nm/min，表面粗糙度最低为2.50 nm；COS质量分数为0.50%时，材料去除率随H₂O₂含量的增加先增大后减小，当H₂O₂质量分数为1.2%时，材料的抛光去除速率达840 nm/min，同时其表面粗糙度为3.52 nm。加入COS络合剂会在铝合金表面形成主要成分为Al-COS、Al₂O₃和Al(OH)₃的弱钝化膜。      

TSL:predicting popularity of Facebook content based on tie strength

The rapid development of online social networks leads to an explosion of information,however,there are great differences in the popularity of different messages,and accurate prediction is always a great difficulty is the current study.Popularity prediction of online content aims to predict the popularity in the future based on its early diffusion status.Existing models for popularity prediction were mostly based on discovering network features or fitting the equation into a varying time function that the accuracy of current popularity prediction model was not high enough.Therefore,with the help of the weak ties theory in sociology,the concept of tie strength was introduced and a multilinear regression equation was constructed combined with the early popularity.A TSL model to predict the popularity of Facebook’s well-known pages was proposed.The main contribution of this article was to solve the problem and few or no work based on sociology.A high linear correlation between the proportion of faithful fans was existed in Facebook homepage with frequent shares in the early and the future popularity.Compared with other baseline models,an experimental study of Facebook (including 1.54 million shares) illustrates the effectiveness of the proposed TSL model,and the performance is better than the existing similar methods.     

Performance analysis of large-scale MIMO system for wireless backhaul network

In this paper, we present a performance analysis of large-scale multi-input multi-output (MIMO) systems for wireless backhaul networks. We focus on fully connected N nodes in a wireless meshed and multi-hop network topology. We also consider a large number of antennas at both the receiver and transmitter. We investigate the transmission schemes to support fully connected N nodes for half-duplex and full-duplex transmission, analyze the achievable ergodic sum rate among N nodes, and propose a closed-form expression of the achievable ergodic sum rate for each scheme. Furthermore, we present numerical evaluation results and compare the resuts with closed-form expressions.     

Isogeometric topology optimization based on energy penalization for symmetric structure

We present an energy penalization method for isogeometric topology optimization using moving morphable components (ITO–MMC), propose an ITO–MMC with an additional bilateral or periodic symmetric constraint for symmetric structures, and then extend the proposed energy penalization method to an ITO–MMC with a symmetric constraint. The energy penalization method can solve the problems of numerical instability and convergence for the ITO–MMC and the ITO–MMC subjected to the structural symmetric constraint with asymmetric loads. Topology optimization problems of asymmetric, bilateral symmetric, and periodic symmetric structures are discussed to validate the effectiveness of the proposed energy penalization approach. Compared with the conventional ITO–MMC, the energy penalization method for the ITO–MMC can improve the convergence rate from 18.6% to 44.5% for the optimization of the asymmetric structure. For the ITO–MMC under a bilateral symmetric constraint, the proposed method can reduce the objective value by 5.6% and obtain a final optimized topology that has a clear boundary with decreased iterations. For the ITO–MMC under a periodic symmetric constraint, the proposed energy penalization method can dramatically reduce the number of iterations and obtain a speedup of more than 2.     

双馈风机经VSC-HVDC接入弱受端系统运行特性分析

基于电压源换流器的高压直流输电(VSC-HVDC)是远距离风电并网的理想方案,同时可用于联接弱受端系统,但双馈风机经VSC-HVDC能够馈入多弱的受端系统仍待深入研究,有必要提出基于短路比的指标来衡量所能接入的受端系统。对此,基于定功率控制下VSC的稳定运行约束,分析系统稳态的临界运行点,总结出临界短路比的求解步骤。在此基础上,结合双馈风机的控制方程,详细讨论了风电场出力、弱交流系统等效阻抗和临界短路比的关系。仿真分析发现,受双馈风机无功特性的影响,接入受端系统的临界短路比未能达到理论值,引入基于无功补偿的有效短路比作为受端系统的强弱判断指标,使得所提临界短路比求解方法在此工况下依然成立。     

螯合树脂塔智能化控制的优化

介绍了螯合树脂塔的工作流程,分析了原控制系统存在的问题,提出了智能化改造方案,达到了预期效果。     

Evaluation of fluctuating voltage topology with fuel cells and supercapacitors for automotive applications

To develop a single‐stage power conversion topology in which energy storage devices can be directly coupled, a fluctuating voltage topology is applied, leading to lower cost and more compactness with the absence of DC/DC converters. This paper investigates such a topology for automotive applications where fuel cells are directly connected to the DC bus of the inverter, resulting in fluctuating voltage across the DC bus. Further, a supercapacitor pack is also introduced to maintain the power capacity and voltage stability. The hybridization principle and practical application of such a topology are then discussed in the time domain and frequency domain. Furthermore, the transient power requirement is decomposed to design the size of fuel cells and supercapacitors. Simulation results from the modeling of the fuel cell‐supercapacitor powertrain demonstrate the feasibility and effectiveness of this topology. The supercapacitors can serve as a low‐pass filter for the fuel cells. In conclusion, the peak power requirement can be successfully achieved because of the lowered system impedance, and the fuel cells only need to supply the average power.     

Vocal production in postpartum dairy cows: Temporal organization and association with maternal and stress behaviors

Mammalian vocalizations can encode contextual information in both the spectrographic components of their individual vocal units and in their temporal organization. Here we observed 23 Holstein-Friesian dairy cows immediately after birth during interactions with their calf and when their calf was separated to the other side of a fence line. We investigated whether the vocalizations emitted in these postpartum contexts would vary temporally. We also described the maternal and stress behaviors preceding and following postpartum vocal production using kinematic diagrams and characterized call sequence structure. The kinematic diagrams highlight the disruption of maternal responses caused by calf separation and show that behavioral and vocal patterns varied according to the cows' emotional states and proximity to the calf in both contexts. During calf interactions, cows mainly produced closed-mouth calls simultaneous to licking their calf, whereas an escalation of stress responses was observed during calf separation, with the cows approaching the fence line, becoming alert to the calf, and emitting more mixed and open-mouth calls. Call sequences were similarly structured across contexts, mostly containing repetitions of a single call type, with a mean interval of 0.57 s between calls and a greater cumulative vocalization duration, attributed to an increased number of vocal units per sequence. Overall, calf separation was associated with a greater proportion of calls emitted as a sequence (inverse of single isolated calls), a shorter interval between separate call sequences, and a greater number of vocal units per sequence, compared with calf interactions. These temporal vocal features varied predictably with the high stress expression from cows during calf separation and may represent temporal modulations of emotional expression. Despite the noisy farm soundscape, empirical call type and temporal vocal features were easy to measure; thus, findings could be applied to future cattle studies wishing to analyze vocalizations for on-farm welfare assessments.